Print

INTRODUCTION: THE APPLICATION ABOUT COMPLETED MUD SYSTEM MANUFACTED BY GN SOLIDS CONTROL

on . Posted in Products

In this article, we will main introduce the widely application about the COMPLETE SOLIDS CONTROL SYSTEM manufactured by GN Solids Control.

 

As a specialized top manufactures in the world, GN could manufacture complete solids control equipments like SHALE SHAKER, DECANTER CENTRIFUGE, VERTICAL CUTTINGS DRYER, VACUUM DEGASSER, VARIOUS PUMPS, and complete mud system which is widely used for treating the drilling fluids or industrial waste in different industries.

 

The treatment capacity of GN’s Complete Solids Control System could meet different drilling rigs that from 250HP to 3000Hp.Usually the whole system includes 5-phase separation, which includes 4-phase solids control and 1-phase degassing,

Phase 1: Shale Shaker - usually separating out the solids over 100μm;

Phase 2: Vacuum Degasser – separating out the poisonous gases in the mud;

Phase 3: Desander – separating out the solids over 40μm;

Phase 4: Desilter – separating out the solids over 20μm;

Phase 5: Decanter Centrifuge – separating out the solids over 2-5μm;

 

GN’s complete mud recycling system is also widely used for treating the drilling fluids in HDD & CBM drilling, water well drilling, mining drilling, geothermal well drilling, etc. As the customers have different requirements with the mud system, the most optimal technical solution and customized mud system could be provided by GN. Such as,

  1. The system maybe only equipped with shale shaker and desander, as it could already meet the actual requirement.
  2. The system maybe equipped different numbers of tanks according to customer requirement.   

GN could manufacture the complete mud recycling system with treatment capacity like 200GPM, 350GPM, 500GPM, 1000GPM, 1500GPM, 2000GPM.

 

GN’s complete mud cleaning system is also widely used for treating the mud in Piling construction and TBM construction.

Based on the different requirements from customers, GN could manufacture the complete mud cleaning system with treatment capacity like 500GPM, 1000GPM, 1500GPM, 2000GPM, 3000GPM.

 

Like the shaker, desander, desilter, centrifuge, these equipments manufactured by GN are also widely used for doing the industrial solids & liquid separation.

Correspondingly GN could provide the complete system for doing the separation work, which is used for diamond drilling mud cleaning, dredging slurry separation, mining slurry separation, oil sludge separation, etc.

 

If you want to know about GN’s Desilter, Welcome to visit GN’s website and contact us.

http://www.gnsolids.com/