Solids control separation and drilling mud recovery and reuse is the critical parts of drilling operation due to the drilling mud is serving as lubricant to making the drill bit dill more smooth and also serve as cooling agent to prevent overheat of drilling bit that will cause damage of drilling bit and the oil-well as well. There are 4 stages of solids control for drilling mud and requires 4 machineries to do the solids separation in the drilling mud: Shale shaker, Desander, Desilter, and Decanter Centrifuge. GN Solids America LLC as manufacture of these machineries offer transparent pricing policy and offer full after service capacity as just like other US manufactures.
As you are aware the steps of needs on solids control for drilling mud, the desander is the 2nd step of needed on solids control machinery. GN Solids America LLC's concept of desander machinery is using 10" size hydrocyclone that create centrifugal force by using centrifugal pump feeding the drilling mud into the 10" hydrocyclone. The numbers that need of 10" hydrocyclone is depends demand of treating capacity of drilling mud. GN Solids America LLC offer desander that can manage 120, 240 and 360 (m3/h) by offer 1, 2 and 3 desander hydrocyclones in bracket . To take the solids control of the drilling mud even further, GN Solids America LLC offer the optional shale shaker to pair with desander to do more through solids control drill cutting separation. The 10" hydrocyclones can perform to remove the size of drill cutting in the mud by down to 45 microns. GN Solids America LLC offer various model of shale shaker with multiple layers of screens panel. This combo unit is functioning as both primary shale shaker and desander unit in one. The drilling fluids gets into this de-sander unit via the mud distributor pipe and then flow on the bottom layer screen firstly for primary solids control. Liquid gets through the screen mesh and falls down to the under located mud tank.