A, process description:
1. The waste will be transported to the serial number 1 (2 sets of drilling fluid shale shaker), through serial number 1 processing, processing after the mud mud fell into the number 2
Tank 1 # tank, solid particles through vibrating screen processing discharge can be collected;
2. 1 # tank mud mud tank by the serial number 3 (screw pump) extraction to number 5 (converter mud centrifuge)
Processing, after liquid into the number 2 (2 # tank in mud tank), solids discharge tank outside;
3. The mud tank in the 2 # tank mud into the serial number 5 extraction, conveying to the mud circulating system or in the process;
4. The serial number 7 to 6 inches of overflow vent valve, when the mud mud tank 1 # tank is full, can discharge through serial number 7;
5. The serial number 8 balance for the next line, when you need to balance the mud tank in the 1 # and 2 # tank can open the valve into the mud
The mud balance;
Second, the technical parameters:
1. To adapt to the temperature conditions: temperature 30 ℃ ~ + 40 ℃, humidity for 90% or less (+ 20 ℃).
2. The design, manufacture, assembly and debugging the strict implementation of IS09001 quality system standards, and in conformity with the relevant standards of the state;
At the same time meet the requirements of railway and highway transportation (9 meters in length, width 2.3 meters)
3. The system of the whole surface (in addition to the assembly, electroplating surface) should be to paint or anti-corrosion treatment, anti-corrosion measures should be guaranteed
Certificate in system normal use cycle (10 years) in good condition.
4. Capacity: ability to sieve sieve acuity after 20 m/h.The centrifuge capacity 20-30 m after/h.
5. Treatment effect, will be more than 2.3 g/cm3 density mud treatment to the density of 1.6 1.7 g/cm3
6. GNZS594E - HB vibrating screen: 2 sets
7. GNLW453CD - VFDS frequency decanter centrifuge: 1
8. GNJBQ055D mud agitator: 1
9. GNG30A - 075 screw pump: 1 motor power: 7.5 kw capacity: after 30 m/h
10. The mud tank: 1