|
Written by Administrator
|
|
Tuesday, 12 April 2011 07:11 |
|
GN Drilling Fluid Systems are widely used for Oil Gas drilling fluid circulation,Horizontal directional drilling fluid recycling, geothermal drilling,mining,coal exploration drilling,water well drilling etc.
The structure of GN ZJ50 drilling fluid processing system is shown in figure 1.
It's mainly consisted of the mud purification tank,the mud storage can, SB8x6-14 sand pump, GNPS70-3S BEM vibrating screen and ZQJ250x3/100x16 three-in-one mud cleaner, 2 agitators with the power of 7.5kW and 5.5 kW,SHL150-50 jet mud mixer,electric controlling part and leader, walkway, guardrail, connecting tube lines etc. It is structural compressed, rational layout, convenient for installation and demolition .
figure 1
1.Electronic control system 2.Floodlight 3.Shale shaker
4.Inlet tube group 5.Combined Mud cleaner 6.Centrifuge for pulp pumps
7.centrifuge pump 8.Jet mud funnel 9.guardrail 10.leader
11.Aggravating pump 12.Infusion pump 13.Mixing slurry pump
14.Processing tank 15.Aisle 16.desilting pump
17.Desand pump 18.Agitator
Function of the ZJ50 drilling fluid purification system
Recovering and purifying the drilling mud overflows from the well opening with high concentration particles during the process of well drilling. The mud would be conveyed through the mud user self-provided pump to mud inlet tube group, the slurry more than 7 Microns would be cleared after processing. Thus to provide the required drilling fluid.
GN Solids Control have rich experience for drilling fluid purification solutions in all kinds of drilling. GN drilling fluid system is turnkey solution with first time commissioning service,training up of users engineer for operating the fluid system.
|
|
Last Updated on Wednesday, 13 April 2011 03:13 |
