Mar 01

Yesterday, GN’s manufacturing department done the fabrication of a mud mixing tank with increase hoppers. Mud mixing tank is widely used in the drilling mud system regarding mixing and re-configuration the actual drilling fluids. Also this will be used for storage the particular active drilling fluids.

mud mixing system
The mud mixing system is actually consisting of mixing tank, mud agitators, mud guns, mixing pump and mud hoppers. Usually, the mixing pump as well as the mud hopper will be situated at one end with the mud tank to make the mixing tank system a compact and also single unit, while in a few projects, the mixing pump and hopper are installed on another skid so that the mixing tank and the jet mud mixer could be used much unhampered. The picture in this article shows that the particular jet mud mixer skid was located at 1 side of the mixing mud tank. There are one mixing pump and 2 mud hoppers on the skid. The mixing pump is connected with the two hoppers, one of the hoppers is needed for mixing barite to create weighted drilling fluids, plus the other one is used for including bentonite into the drilling liquids.
There is a steel frame about second hopper with iron bars over the hopper. This specific horizontal steel bar is needed to hang the bentonite handbag which will be hooked at several corners of the steel structure to make it easier for adding typically the bentonite powder into the hopper. It is worthy to mention the fact that steel bar is with forklift lifting slot so that the club with bentonite bags may be lift and put on the shape by a forklift to save man power.
This mud mixing system is with a control panel to control mixing pump which could transfer mud to both hoppers. Around the mixing tank, there is one more charge pump which is used to help transfer the active mud back to the rig with regard to reuse.

Share

Related posts:

  1. Personalized mud mixing tank system to South America
  2. GN 200GPM Mud Mixing & Cleaning System
  3. GN Mud Mixing tank
  4. Clear Solutions mud mixing system VS GN mud mixing system
  5. GN 500GPM Mud Recycing & Mixing System for HDD

written by Decanter Centrifuge \\ tags: , , ,


Leave a Reply