Mar 27

The shale shaker GNZS752 can work as a independent part or together with tank 1# . 3 shakers. When the three pieces of shale shaker are working together and screen mesh reaches to 200, desilter can be stopped .While because when the screen mesh reaches to 150 , it will help greatly for mud cleaner, reducing abrasion for mud pump and drill bit ,increase the working performance. It is suggested that using as many mesh of shale shaker as possible.

When desander arrives at the site and is ready for installation fix it with screws and connect all the pipes.Shaker screen is an easy vulnerable but expensive part in this system, the quality of installment will deeply affect the using period of the screen.

Note:When install, put the side wedges under the wedge roof firstly, then use hammer to beat the sides wedges tightly and balance. The wedges are specially matched with the Solids Control, when replacing must be cautious and avoid missing.

Gnsolidsamerica is the author of the article on mud cleaner and  Shaker screen, find more information about Solids Control.

written by GN Decanter Centrifuge \\ tags: , , , , , , , , , ,

Leave a Reply