Aug 17

GN Solids Control is the world’s leading manufacturer of solids control equipment and mud recovery systems. As its US subsidiary and North American headquarters, GN Solids America expects a large number of vibrating screens to enter the warehouse, most of which will become an alternative screening for DERRICK, MONGOOSE and KING COBRA / VENOM.
As a leading manufacturer of shale shakers, mud washers, decanter centrifuges, cutting dryers, centrifugal pumps, etc., GN’s new No. 2 equipment has just been put into production, which will increase its manufacturing capacity to 5,000 shale vibrations. screen. From now on, GN will use composite frames to make most of the screen, not the old metal frame. The new composite frame has some new features and advantages, lighter and more durable, with more discrete blank areas, and the non-blank area will increase by 10% to 20% compared to the metal frame screen. Starting with API 60 and above, it will be 3 layers and the screen life will be extended from 300 hours to 700 hours. And the storage life can be increased to 5 years. GN’s vibrating mesh suppliers are now the same as DERRICK and MI SWACO. GN can now produce composite replacement screens for the following brands: Mi Swaco MONGOOSE, Mi Swaco MD-3 / MD-2, NOV BRANDT King Cobra, Venom, VSM-300, FSI screen, Derrick 2000. If your order quantity is large enough We can customize the size of the injection mold for you. The composite shaker can also be repaired, which means it will cost you less to fix it instead of buying a new one. Now GN can make screens from API 20 to API 400.

Now that it is near the end of the year, GN also has some year-end promotions, please call and ask for the price. Visit our website at www.gnsolidsamerica.com for more information, please send your questions to USA@gnsolidscontrol.com.

swaco-replacement-screen

written by Decanter Centrifuge

Jun 14

Solid control is very critical during the oil and gas drilling process, it will maintain the required property of the drilling mud and remove the low gravity solids from the liquid, and finally can make the drilling mud which could be reused and recycled in the drilling mud system. A good solid control process could increase the rate of penetration, reduce the wear and tear of the drilling equipment, such as the pistons, liners of the mud pump and allow for better hole cleaning.

GN’s solid control equipment can perform very well during the drilling process, and most of them are specially designed as compact, skid mounted and very mobile. One consumable part for the solid control equipment is the shale shaker screen. This year GN made a lot of effort in the improvement for the screens. GN launched its second facility specially for making the shaker screens of composite frame. Now GN has composite frame replacement screens available for MONGOOSE, KING COBRA/ VENOM, FLUID SYSTEM.

Recently U.S drilling market has been very active, and rig counts has increased to over 1000 rigs. Screen supplies is getting harder to find the right replacement screen. GN Screens has been tested in the market for a very long time, and we keep our eyes always on quality and pricing. Many of our competitors offer 30 days limited supplies on their screen, which we at GN offer our client stock inventory with 5000 plus screens and delivery time as short as 1 day. That is the reason why more clients are calling GN Solids America for their screen inquires and we are doing everything possible to take care of our client.

We are also pushing our own design and full composite frame screens to supply local drilling market. It is much lighter and more durable than the conventional metal frame screens. That’s the brief introduction about GN’s screen strategy. GN would like to hear from you. Welcome to visit www.gnsolidsamerica.com and please send your ideas to USA@gnsolidscontrol.com .

swaco-replacement-screen

written by Decanter Centrifuge

Mar 01

Drilling budget is only factor that determine the drilling project that can be operational or not, especially in current situation.  To meet the demand of smaller budget and not in demand of high treating capacity of drilling solids control on drilling mud, GN solids America LLC offer 3 panel shale shaker, model# GNZS703E that is a ideal choice between treating capacity, machine size, operation cost of screen use and the purchase price.  GNZS703E is a 3-panel single deck shale shaker with linear motion. The shaker model is designed and made by GN Solids America LLC in facility in China, who is leading exporter of solids control machinery over 60 plus countries around the world.

GNZS703E shale shaker uses:

1) The GNZS703E shale shaker mainly use in oil and gas drilling, used as the first phase solids control equipment.

2) The shale shaker design ideally uses in compact mud recycling system.  Other drilling industry like horizontal directional drilling (short name: HDD), water well drilling, coal bead methane (also called CBM drilling) that only demand low-demand of solids separation from the drilling mud is ideal choice because of budget and operation cost of the whole mud system. It can also be used in other underground construction system as pre-separation of solids.

GNZS703E shale shaker per different feeding type

Option 1 is top feeder.  It is designed mainly use in oil and gas drilling field. As in oil and gas drilling field, the dirty mud from well head will be transferred by pumps through pipelines. They do not use mud pit for storage. The mud pumped from well head will flow to the shale shaker feeding box through the pipelines and fall down directly to shale shaker by the gravity.

Option 2 is back feeder. It is specially designed for HDD and water well drilling, the system is compact and mud tank will not be as big compare with use in oil drilling industry with advantage of smaller environmental impact.   replacment screen for derrick flc500

written by Decanter Centrifuge

Jan 30

GN Solids America LLC is leading solids control manufacture that make not only machinery, but also replacement parts as well just like other leading USA manufactures.  The mostly use replacement parts we manufacture is shale shaker screen in various size, frame material, and mesh counts.

swaco-replacement-screen

The flat surface screen made with steel tube frame is the most common screen use in almost every mud conditions.  This kind of spec of shale shaker screen, depends on mesh count, have either two or three layer of stainless steel screen cloth adhesive in the open hole of the metal lining plate.  When screen shown minor wear and tear, we provide  with special rubber plug to cover the damage, can effectively save time and extend the usage of the shale shaker screen. Our factory has a wealth of experience and mature technology in production, can make a variety of sizes of flat screen according to the needs of different customers.

GN Solids America LLC’s  making process of shake shaker screen:

1, each layer of screen mesh is different, to reasonable collocation different number of screen.  The lining board of the size opening is differ, in order to ensure have sufficient strength of the premise, try to obtain the maximum effective area.

2, the bottom of the thick wire mesh and steel net closely as a whole, to enhance the strength of pieces of whole net, prolongs the service life.

3, The mesh lining plate is divided into multiple independent small net surface can prevent minor use damage, excessive expansion, and is equipped with special rubber plug for repair  the minor damage for extend of use.

4, Besides the steel tubing frame shale shaker screen, GN Solids America LLC also offer composite frame shale shaker screen for major brands widely use around.  The custom made screens and hybrid spec screen also available as well.

written by Decanter Centrifuge

Jul 26

Established in 2007, GN Solids Control has grown from a local Chinese company to a big international company specialized in manufacturing solid control equipment and system. In 2014, it consecutively established subsidiaries in US and Russia to better serve the local customer and guarantee the quick delivery. Now GN solids control’s products covers from flow line control to waste management, such as the shale shaker, desander, desilter, mud cleaner, decanter centrifuge, cutting dryer, centrifugal pump, screw pump, vacuum degasser, mud gas separator, submersible pump, shear pump and so on. And GN just finished the construction of the NO.2 factory in China which specialize in manufacturing the solid control consumables- shaker screens. Now it can manufacture the screens for 5000 pieces per month with high quality and competitive prices. This will help the oil and gas industry customers a lot especially in the low oil price environment.

160629-Tandem-Shale-Shaker

Recently more and more customers get to know GN’s products and start inquiring the info about GN’s products. To better help the customers knowing GN’s product, here are some naming rules needed to understand. Now we will explain it for you gradually.

Let’s start with the shale shaker. GNZS703ED-HD, GN mean the company name, Z means the machine’s motion is linear, S means shale shaker, 703 means the shaker screen width is 700mm and the shale shaker is working with 3 screens, E means the 5th generation of the shale shaker. Since establishment, GN is always striving to improve its products and keep innovative to make all of the products line at the cutting edge of the oil and gas technology. D means the weir is lower than the regular product. This could be customized according to the customer’s requirements. HD means the position type of the possum belly, it is may be installed at back or on the top.

That’s the basic knowledge of the shale shaker’s naming rule. Hopefully it will be useful to you.We will try our best to assist your business to be successful. Welcome to visit www.gnsolidsamerica.com and please send your inquiries to USA@gnsolidscontrol.com

written by Decanter Centrifuge \\ tags: , , , , , ,

Jul 20

GN Solids America capability was first established in 2014 in Houston, TX. The particular facility is a multi efficient with office, assembly heart and spare parts center. Typically the facility takes about 30, 000 square feet. This office could be the first overseas subsidiary with regard to GN Solids Control and is particularly performing the function as income, after market service and also warehousing.
Now in GN Solids America warehouse, there is certainly plenty of shale shaker screen inside stock. There are many types of screen there, such as the GN individual brand GNZS series, substitution screens for MI-SWACO MONGOOSE PRO, MONGOOSE PT as well as MEERKAT, ALS, BEM; alternative screens for DERRICK FLC 2000, FLC 500, DP 600, and hyperpool; substitute screens for NOV Brandt Cobra, King Cobra, Small Cobra, Venom, LCM-2D, LCM-3D, VSM 300 series( contain scalping, primary and secondary) and replacement screen for a few other popular brand, for example Fluid System. GN Solids control can manufacture various types of screen, such as the composite shape, metal frame, soft attach strip and hard attach strip. The screen may be flat or pyramid based on customer’s requirement. The screen could be 2 layers as well as 3 layers depending on the customer’s requirement for the API variety. The screen surface are created from stainless steel, usually use SS304 or SS316. This material may make the screen more long lasting and work for longer time period. GN can manufacture often the screen from API thirty to API 400.

GN shale shaker screen
GN Solids Control’s 2nd manufacturing unit for shaker screen and decanter centrifuge will eventually be in production. It will be on the verge of produce about 5000 components of screens annually. The screen frame will be mainly blend material. GN recommends the customer to use composite body shaker screens because it may be lighter, has longer consumption life, corrosion resistant and has now larger non-blank area. Today GN screens have been purcahased by global market, we hope towards your inquiry soon.
Welcome to pay a visit to www.gnsolidsamerica.com and please send your own personal inquiries to USA@gnsolidscontrol. com

written by Decanter Centrifuge \\ tags: , ,

Jul 05

Replacement screen is a big and continue cost for the drilling rig operations. As a China leading manufacturer and a worldwide famous brand for mud solids control, drilling waste management, as well as replacement shaker screen, GN Solids Control knowswell that clients need very good quality replacementscreens with competitive price.GN men keep improving its screen quality and the processing technology in order to offer clients with higher quality screen with better price.

GN Solids Control opened his first new facility in Beijing in year 2012. And this year, GN Solids Control set up his second new facility in Beijing. Once the new facility is ready, GN Solids Control can make composite material replacement screen there, in including but not limited to below:

  • Composite material Replacement screen for the whole line of GN linear motion shale shaker: GNZS752 2-panel shale shaker, shaker, GNZS703 3-panel shale shaker, GNZS594 4-panel shale shaker,GNZS753 double deck shale shaker and GNZS706 double deck shale.
  • Swaco Mongoose composite replacement screen
  • VSM 300 composite replacementscreen
  • NOV Brandt King Cobra Composite Screen(Thickness:26mm without rubber, not big thickness)
  • Fluids System (FSI) Composite replacement screen
  • Furthermore, as GN hot sale products, GN Solids improved the manufacturing technology of the hook type replacement screen for Derrick 500 shaker and for Derrick 2000 shaker.

GN shale shaker screen

And GN Solids Control can customize any mold for frame screens if there is a market for that.

In order to support clients more, GN Solids Control can offer customized packages for the screens. They can make screen with clients color, company name and logo,

For clients with reliable requirement for shaker screen, GN Solids Control welcomethey pay visits to GN Solids Control head quarter in Beijing to have a visit of GN 2 facilities. They will know GN quality and products such as shear pump, mud cleaner , decanter centrifuge, mud mixing  system .etc. well. And they can talked with GN engineering team for a better and customized service to them.

written by Decanter Centrifuge \\ tags: , , , , , ,

Jun 28

GN Solids Control is really a world famous solids control maker and drilling waste management turnkey provider.
This year GN Solids Control will sign up for many top oil and gas display. GN Solids Russia may attend the MIOGE 2016, which is one of the largest vitality shows in Russia along with Europe. Another branch firm GN Solids America may also attend the great OTC demonstrate.
This year the MIOGE is actually hold at EXPOCENTER within Moscow, Russia from Rate of interest. 18th to 21st. GN Solids Russia booth number is Pavilion-2, Hall-5, T 40.
Welcome to connect with GN Solids Russia for more info, GN Solids will give hot here you are at all GN old along with new friends in this demonstrate. GN Solids Russia is found at Г. Москва, Радонежского Сергия Ул. д. a couple of, please feel free to call +7-8(925)304 25 70 +7- 8(968)950 31 49 and make the reservation.
GN Solids Russian federation will exhibit the following tools:
1 . GN Mud Cleaner
GNJZ594E-3S16N will be exhibited with this show. This one compact solids control equipment with a few sets desanders and fourth there’s 16 sets desilters on the top of a single GN shaker. This GN shaker is using the same dimensions of Mongoose screens. GN also manufactures various shaker screens, such as replacement projection screens for Derrick, NOV, FSI etc .

Russia Oil Show
2 . GN Decanter Centrifuge
GNLW363 centrifuge is really a proven successful equipment that may be used to separate mud and also recovery barite. With Tungsten carbide tiles along the attach propellers and ceramics plug-ins, GN decanter centrifuge is far more resistance and can be used for a longer period.
3. GN Cuttings Dryer
GNCD930 cuttings dryer is especially used for OBM, SBM or even WBM separation. With these many years feedback from worksites, GN cuttings dryer has been replacing to separate all the cuttings via shale shaker, desilter.
GN Solids America LLC also has a couple booths in this year from the OTC show, one is from the NRG Center (booth number 1652-A) for GN Solids Control and another with the area for GN Solids America (booth no . 9732).

written by Decanter Centrifuge \\ tags: , , , , ,

Jun 02

Two weeks ago, GN sales team members and GN top management were back from Houston, USA. They went to Houston for the yearly oil and gas festival, the OTC Oil Show. This OTC was a success for GN. Most of GN’s equipments in stock in Houston warehouse were sold out and GN Solids Control’s name was better spread among the oil drilling and oil service companies.

After the OTC Oil Show, GN staff in USA branch has to be busy for a while for packaging the equipments and deliver them to the buyers.

GN Solids Control in OTC

GN GOT BIG SUCCESS IN OTC

This OTC, GN has two stands, one is in Chinese companies’ area. Even before GN set up the branch with name of GN Solids America in USA, GN’s brand was known to many companies in the world. Now this brand becomes more and more famous.

Of course, this is not only because of the Oil Show, the more important reason is that GN’s products are of high quality and good performance. What are GN’s core products and which are the best sellers?

  1. GNLW363CG Decanter Centrifuge. Decanter centrifuge is not only used in solids control, but also, more widely used in waste management systems. unless other solids control equipments, centrifuge shows more about a company’s producing ability. It could be used for solids control, drilling cuttings waste management equipment after the VG dryer or the high-G shaker, and also plays as dewatering centrifuge for drilling fluids.
  2. GNCD series vertical cuttings dryers. Comparing with decanter centrifuge, it is a new product. It is designed originally for the oil based mud drilling cuttings waste management. But as some GN clients are using it in water based mud also, GN now designed the 5th generation with new material in order to deal with the water based mud. Now more than 50 sets of GN vertical cuttings dryers are working in many countries in the world and the feedbacks are better than OK.
  3. GN shale shakers and high G shakers. The shakers, solids control shakers and high G shakers for waste management systems are both important, they are used to separate out most of drilling cuttings.

4. GN shaker screens. GN make high quality of shaker screens for both GN’s own shaker and other brands’        replacement shaker screens.

written by GN Decanter Centrifuge \\ tags: , , , , , , , ,

Jan 18

Shaker screens are most consumable spare parts in solids control systems, and the screen quality is very important to the shale shaker’s performance and also the complete solids control systems’ performance. Although many manufacturers could produce shaker screens, the quality are not same.

GN Solids Control is a professional manufacturer of solids control industry and has designed many shale shakers which are widely used in many countries and regions in the world. With a rich resource of customer feedback and many real tests on the shale shakers, GN knows how to make the most cost effective shaker screens, not only for GNZS series shale shakers self use, but also for other brands, some of what are international brands while some are customized brands.

What screen models does GN make?

  1. GN Solids Control’s own shaker screen models for GNZS594 shale shaker, GNZS703 Shale shaker, GNZS752 Shale shakers.
  2. Replacement screens for Derrick 500 series shakers and replacement screens for Derrick 2000 series shale shakers.
  3. Replacement screens for Swaco Mongoose shakers.
  4. Replacement screens for other international brands.
  5. other customized screens per clients’ drawings or GN designed especially for clients’ shakers.

What kinds of frames does GN have for shaker screens?

GN makes screens with carbon steel frame, composite material frame, and some are steel pipe frame.

GN provide screens from API 20 to API 400, with stainless steel mesh cloth of good quality.

GN Shaker Screen For Sale

Why choose GN as screen supplier?

  1. GN Solids Control is first API certified solids control company in China and shale shaker is one of GN’s core products, GN is more familiar with screens technology and performance.
  2. GN has a separate shale shaker factory based in mesh center of China.
  3. GN use the best material and professional workers for screen production to make every detail perfect.

 

Now GN is promoting screen sales by end of Chinese year, pls contact GN sales team for more information.

written by Decanter Centrifuge \\ tags: , , ,