Feb 16

GN Solids America LLC offer friendly unit cost on mud cleaner who is watching operation cost closely.  As the manufacture that making full line of solids control machinery and mud cleaning  system.  We provide complete solution of solids control need in various drilling operation and full after-sales service around the world as well.  We are the balance of cost effective and prompt after sale service manufacture.

Mud cleaner  is the combination of hydrocyclone in desander and desilter.  The shale shaker in the bottom for treating mud that exits on both kind of cones of the drilling fluid . This combination have the advantage of space saving and operation cost saving.

GN Shale America

Drilling fluid mud cleaner is a filtering equipment of solid control purification system. Mud cleaner is composed by inlet, outlet pipe and hydrocyclones. Hydrocyclone is made of PVC, upper cone, and under cone. The overflow line, inlet line and outlet line is fixed by the clamp. The bottom inject outlet can be adjusted and changed it according to drilling cutting in drilling fluid. When adjust the bottom flow mouth, only need screw out the adjusting spray result. Screw on the adjusting spray after changed the bottom flow sand removal exit. The both side of desander are equipped the inlet mouth, when choose the side, the other side need to cover off by blanking cover.  The heavy solid phase particles are throw to the cylinder wall by the centrifugal force, which is spiral sinking under the action of the thrust drilling fluid downward spiral and discharged from the bottom flow mouth, the flow to the screen surface.

GN Solids America LLC over 3 size of shale shaker to pair up various hydrocyclone size to meet different treating capacity need on drilling.  The model offered:  GNZJ703E-D1S8N.  GNZJ703E-2S12N. GMZJ703E-3S16N.  GNZJ594E-2S12N.  GNZJ594E-3S16N.  With combination of shale shaker and mud cleaner, it can remove solids in the mud on 20-50 microns.  We offer full lines of shale shaker screens in composite frame that will be acid resist and last longer than steel frame screen  in house to become single supply source of drilling operation.  The after sale service crews are standby for movement’s notice with full range of parts available in Houston Texas.

Share

written by Decanter Centrifuge \\ tags: , , , , ,

Sep 06

Dewatering technology is greatly use for chemical separation of the solids phase form the liquid. By using some chemicals, the fine particles of solids flocculate into larger ones and to be separated out from the liquid phase. Take the oil and gas drilling mud industry as example, there are 2 main methods to be used, the dewatering centrifuge and the filter press. Seen from their outlook and working principle, they are quite different, but which to choose and why to choose is not only based on the first look, we need a detailed calculation.

  1. Purchasing cost. The cost for buying each of them is no much different, and also comparing with future consumption, this cost seems less important.
  2. The chemicals consumed: because of the high speed and high G force of the decanter centrifuge, no much chemical is needed. But in case of filter press, more chemicals in need for fulfil the work.
  3. Water usage amount: the decanter centrifuge need to be flushed only after continuous operating and the water consumption for each time is 3-4 cbm per day, but the filter press need to be flushed all over after usage, need around 150 cbm per day. In some water scarce place, this factor has to be taken into consideration.
  4. Human force needed: it is not a heavy work to operate or observe the operation of the decanter centrifuge, so one person for one centrifuge is enough. In case when several centrifuges are at same place, even one operator can work for them all. But in case of filter press, one filter press need at least 2 persons to run it.
  5. Spare parts: the spare parts for decanter centrifuge is less than the filter press.

GN centrifuges

GN Solids Control is professional in decanter centrifuges, GN has decanter centrifuges from 9 inch bowl diameter to 22 inch bowl diameter and now GN decanter centrifuges are not only used for oil and gas industry but also for other industries. For more information, welcome to contact GN freely. GN solids control produced mud handling equipments and mud tanks are mainly used for cleaning and recycling the used driling fluids from the well bore. The mud handling equipments range including: Shale shaker, mud cleaner, desander, desilter, vacuum degasser, chemical mixing unit, Mud Gas Separator, mud agitator, bottom mud gun, shear pump, decanter centrifuge, vertical G cuttings dryer.

Share

written by Decanter Centrifuge \\ tags: , , , , , , , ,

Aug 11

Mud plant is very important application in solids control industry for oil and gas drilling industry. It is used to further treat and to storage the drilling mud back from the solids control system of rig site and get the drilling mud to be ready for next time use.

drilling mud system

What equipment is used for a mud plant?

Normally, the mud plants’ main application is for storage the drilling mud, and adding some necessary chemicals into the mud. So the commonly used equipment is:

  1. Mud agitators. Where there’s mud, there’s agitator. Because if the mud is still for a while, the heavy components in the mud would settle down to the bottom and as long as they settle down, it is difficult or even impossible to re-stir them. So mud agitator is a continuously working equipment in a mud plant. GNJBQ series mud agitators covers all necessary models for oil and gas use mud agitators, it is compact in structure and with a powerful strength. Based on your tank depth, GN could recommend you with suitable model of mud agitator.
  2. Mud guns. Normally, the mud gun and mud agitator are used in pairs, like besides each mud agitator, there’s a mud gun. As the mud agitator is working in the middle of the tank, the mud gun is used to stir the mud in the tank corner. GN mud gun is suitable for high pressure up to 6.4 Mpa, and there are fixed nozzle models and rotary nozzle models for option. In addition to the main application as stirring the drilling mud at tank corner, the mud gun could also be used for transporting the mud from one tank to another.
  3. Jet mixing system. It is combined by a jet mixing hopper and a feeding pump for the hopper. For making the old mud to be suitable for future use, we need to add some chemicals into the mud. GNSLS series hoppers are made of stainless steel, with same or even better material than USA brands and with a longer service life. GNSB series centrifugal pumps are interchangeable with MISSION pump with spare parts. It could be used as feeding pump for hopper and desander or desilter’s feeding pump.
Share

written by Decanter Centrifuge \\ tags: , , , ,

Jul 26

Established in 2007, GN Solids Control has grown from a local Chinese company to a big international company specialized in manufacturing solid control equipment and system. In 2014, it consecutively established subsidiaries in US and Russia to better serve the local customer and guarantee the quick delivery. Now GN solids control’s products covers from flow line control to waste management, such as the shale shaker, desander, desilter, mud cleaner, decanter centrifuge, cutting dryer, centrifugal pump, screw pump, vacuum degasser, mud gas separator, submersible pump, shear pump and so on. And GN just finished the construction of the NO.2 factory in China which specialize in manufacturing the solid control consumables- shaker screens. Now it can manufacture the screens for 5000 pieces per month with high quality and competitive prices. This will help the oil and gas industry customers a lot especially in the low oil price environment.

160629-Tandem-Shale-Shaker

Recently more and more customers get to know GN’s products and start inquiring the info about GN’s products. To better help the customers knowing GN’s product, here are some naming rules needed to understand. Now we will explain it for you gradually.

Let’s start with the shale shaker. GNZS703ED-HD, GN mean the company name, Z means the machine’s motion is linear, S means shale shaker, 703 means the shaker screen width is 700mm and the shale shaker is working with 3 screens, E means the 5th generation of the shale shaker. Since establishment, GN is always striving to improve its products and keep innovative to make all of the products line at the cutting edge of the oil and gas technology. D means the weir is lower than the regular product. This could be customized according to the customer’s requirements. HD means the position type of the possum belly, it is may be installed at back or on the top.

That’s the basic knowledge of the shale shaker’s naming rule. Hopefully it will be useful to you.We will try our best to assist your business to be successful. Welcome to visit www.gnsolidsamerica.com and please send your inquiries to USA@gnsolidscontrol.com

Share

written by Decanter Centrifuge \\ tags: , , , , , ,

Jul 26

A .The adjustment of the drum speed.

 

The adjustment of the bowl speed is performed in  manual adjustment or decanter centrifuge plate prescribed maximum working speed following the adjustment.

Different rated speed by installed different size wheel by diameter for driving the main belt wheel to set different drum operation speed

In variable frequency drive decanter centrifuge will paired with control panel that allow increase and decrease the drum speed.

By fine-tuning the speed of the drum, it can perform more precise solids particles separation.  It can also improve the wear of the drum, the vibration and the noise to extend the service life of the decanter centrifuge.

The separation purpose or drilling fluid solids content  is by the choice drum speed. For instance, barite recovery or processing high-density mud, it is suggested that the low spending  speed. For general medium density mud prefer choose medium or high speed.  The low density mud is ideal for using high speed decanting centrifuge.

decanter centrifuge-2

 

B. The adjustment of the differential drive

 

Centrifuge differential speed (back drive is also refer by) in its within the prescribed scope of, do not suggest user to adjust and it can only adjust in a small range change the parameters.

Different speed centrifuge adjustment methods are remove the original auxiliary motor pulley, and reloading large diameter or smaller diameter belt wheel  Auxiliary motor pulley  change the differential input shaft speed enhancement in result of differential speed decreased. On the other hand, it can also cause differential speed increase.

 

Operators must understand that regular maintenance on the centrifuge such as regular cleaning the inlet and outlet by filling water or diesel depends what kind of fluid it needs process.  It is also crucial that  add grease to the bearing parts to ensure proper lubrication.

GN Solids Control sell a series of solids control equipment and drilling waste management equipment including vertical cuttings dryer , shale shaker  , shear pump , oilfield shale shaker , mud cleaner , desander and desilter , vacuum degasser , Mud Gas Separator , decanter centrifuge , mud tank , mud agitator , etc . GN Solids Americal normally keep stock for GN main product and shale shaker , mud cleaner and decanter centrifuge always keep stock there to service local client .

Share

written by Decanter Centrifuge \\ tags: , , , , , ,

Jun 28

GN Solids Control is really a world famous solids control maker and drilling waste management turnkey provider.
This year GN Solids Control will sign up for many top oil and gas display. GN Solids Russia may attend the MIOGE 2016, which is one of the largest vitality shows in Russia along with Europe. Another branch firm GN Solids America may also attend the great OTC demonstrate.
This year the MIOGE is actually hold at EXPOCENTER within Moscow, Russia from Rate of interest. 18th to 21st. GN Solids Russia booth number is Pavilion-2, Hall-5, T 40.
Welcome to connect with GN Solids Russia for more info, GN Solids will give hot here you are at all GN old along with new friends in this demonstrate. GN Solids Russia is found at Г. Москва, Радонежского Сергия Ул. д. a couple of, please feel free to call +7-8(925)304 25 70 +7- 8(968)950 31 49 and make the reservation.
GN Solids Russian federation will exhibit the following tools:
1 . GN Mud Cleaner
GNJZ594E-3S16N will be exhibited with this show. This one compact solids control equipment with a few sets desanders and fourth there’s 16 sets desilters on the top of a single GN shaker. This GN shaker is using the same dimensions of Mongoose screens. GN also manufactures various shaker screens, such as replacement projection screens for Derrick, NOV, FSI etc .

Russia Oil Show
2 . GN Decanter Centrifuge
GNLW363 centrifuge is really a proven successful equipment that may be used to separate mud and also recovery barite. With Tungsten carbide tiles along the attach propellers and ceramics plug-ins, GN decanter centrifuge is far more resistance and can be used for a longer period.
3. GN Cuttings Dryer
GNCD930 cuttings dryer is especially used for OBM, SBM or even WBM separation. With these many years feedback from worksites, GN cuttings dryer has been replacing to separate all the cuttings via shale shaker, desilter.
GN Solids America LLC also has a couple booths in this year from the OTC show, one is from the NRG Center (booth number 1652-A) for GN Solids Control and another with the area for GN Solids America (booth no . 9732).

Share

written by Decanter Centrifuge \\ tags: , , , , ,

Jun 21

“GE, an industrial company, but also a digital company”. Some people may have watched this commercial on American’s main media, like CNN or NBC and we may wonder what does that mean? The answer is it represents the future trend-digital and automation.

As we all know, GE is the conglomerate in many industries, such as energy, electric appliances, aerospace and so on. So its action and strategy will represent the future of the industry. Recently GE just opened its new main office nearly San Jose and recruited a lot of engineers from Google, Apple, Microsoft with background of electrical engineer to develop its own system  called “Predix”, which is the world’s first and only cloud-based operating system for industry. GE plans to make “Preix” as the industry standard similar to the position of Microsoft Windows system in the PC industry. It will realize the digitalization and automation of the industry, including the oil and gas industry. One example for this trend is on June 14,2016, GE and Technip signed memorandum of understanding to explore digital solutions for new LNG projects. LNG will have great potential for growth as the world’s demand rises. So this prosperous area will be co-developed by the combination of strength of GE and Technip. GE will provide it reliable equipment solutions for the global LNG facilities, through sensors, advanced analytics and diagnostic expertise. Technip will provide unique expertise in EPC for LNG projects.

gn-solids-america-about

The future of the oil and gas industry will be more efficient and powerful, which will be realized by digital and automation and will optimize the equipment and operation to improve the productivity and cost-efficiencies.

As the crucial part of the mud cleaning system of the oil and gas industry, solid control system will also inevitably follow the trend of automation and digital, including its shale shaker, desander, desilter, mud cleaner, decanter centrifuge, mud agitator, cuttings dryer  and some other equipment and parts. GN solids control can manufacture the most advanced solid control equipment in the industry, such as the VFD controlled equipment which can realize the automation and digital. Welcome to log in to our website www.gnsolidsamerica.comto check more about the product info and send your inquiries to usa@gnsolidscontrol.com.

 

Share

written by Decanter Centrifuge \\ tags: , , , , , ,

Mar 23

Hebei GN Solids control company LLC is actually China leading manufacturer with regard to drilling mud solids control equipment and drilling waste management gear. Its brand name is GN Solids Control.
GN Solids control offers one quit solution for drilling device fluids, from mud solids control until the drilling waste management treatment system.
Since the first API certified solids control manufacturer from China, GN Solids Control aims upon China top market and also the international market. 70% associated with GN Solids Sales is actually from international market. GN Solids Control keep enhancing to cater for the higher as well as higher request of the worldwide market clients. With its quick development, GN Solids Control is among the leading solids control mafanucturers from all over the world as well as establish a famous brand: GN Solids Control.

new website
In order to offer a much more efficiency services to customers, GN Solids Control upgraded the company website, to offer a much better visual effect website. It can match for the mobile reading gear.
The new website of GN Solids Control is much more legible. And the new menus may hopes the visitors to discover the suitable equipment and information much more fast.
Further more, GN Solids Control upgrade its logo. All equipment documents as well as new equipment will start to make use of the new logos from now on.
Beneath is some of the advantages of GN Solids Control
1) GN is the First API licensed solids control equipment producer coming from China.
2) GN Solids America LLC is the first UNITED STATES based solids control organization from China.
3) No . one in China for immediate exporting of mud solids control and drilling waste materials management equipment. GN Services happen to be exported to over 60 nations and regions, with spouses and branches in UNITED STATES, Australia, Latin America, Center East, Africa etc .
4) GN Owns over ten patents for solids control and drilling waste management equipment.
GN offers one-stop and turn-key solution with regard to solids control and going waste management.
GN maintains research and develop the very best technology to manufacture high quality Shale shaker, mud cleaner, desander, desilter, vacuum degasser , mud mixing system ,mud tank system, mud agitator, bottom mud gun, shear pump , decanter centrifuge, vertical G cuttings dryer for our clients.

Share

written by Decanter Centrifuge \\ tags: , , , , , ,

Dec 10

As China leading manufacturer of mud systems, GN Solids Control mainly focus on below fields:

1) Drilling mud solids control equipment, like shale shaker, mud cleaner, desander, desilter, mud agitator, mud gun, mud tanks, mud mixing system, liquid mud plant (LMP), poor bog degasser, vacuum degasser, barite recovery centrifuge, solids control centrifuge, etc…

2) Drilling waste management equipment, like high speed centrifuge with PLC VFD control, big bowl big volume centrifuge, vertical cuttings dryer, high G drying shale shaker, drill cuttings solidification unit, thermal desorption unit (TDU), screw conveyer and other cuttings transfer unit

3) Unlike other solids control manufacturer, GN Solids Control also specialized in Compact mud recycling system for HDD rig, CBM rig , water well drilling rig, Geothermal drilling rig and other no-dig and trenchless rigs.

下载

 

GN Solids Control customized 1000GPM HDD mud recycling system for (China Petroleum Pipeline Bureau) were sent to their jobsite and achieved excellent activities.

For easy movement and cater for hazardous environment, the 1000GPM including below equipment:

1) 1 set double deck shale shaker desander. The top deck uses fine screen while the bottom deck utilize coarse shaker screen.

2) 1 set double deck shale shaker desilter. The top deck uses fine screen while the bottom deck utilize coarse shaker screen.

Many customer may wonder, why there is no shale shaker for the system. The reason is that, the bottom deck shaker of desander and desilter have been alliented by mud distribution pipes. Mud comes out from well head will be divided into the 2 bottom shaker deck.

All mud from bottom shale shakers and desander will fall down into the shaker tank, and then transferred to desilter for treatment. Clean mud from desilter cone will fall down to desilter tank, while dirty mud will be separated again by bottom shaker and fall down to shaker tank for recycling.

3) 2 ea middle speed centrifuge also equipped for the system to enable a perfect separation. The 2 centrifuges are mounted on the a skid for easy movement.

4) 2 ea mud tanks, desander desilter feeding pumps, tanks accessories, etc…

 

 

Share

written by Decanter Centrifuge \\ tags: , , , ,

Nov 25

GN Solids deliveried a set of 500GPM mud recycling system to a Tiongkok client in May on this year, this mud trying to recycle system already worked regarding 3 drill holes yeat with good feedback soon after jobsite performance. The HARD DISK DRIVE mud recycling system will be required very compact design with shale shaker, desander, desilter, centrifugal pump and mud tanks. HARD DISK DRIVE is the short name associated with horizontal directional drilling, which could require 2 sets involving mud system and tool rigs at each side if drilling.

Main Equipment From the HDD Mud System

two set of 20 feet dirt tank for mud safe-keeping and recycling, the first reservoir sit one set of shale shaker with desander cones then one set of shale shaker along with desilter cyclone. The second container sit 2 sets connected with decanter centrifuge for good solids separation.

1 established shale shaker with 3 sets of 8 in . desander cone for 500GPM mud recycling, the shaker deck work for drying solid waste out of desander cone in addition to product dryer solids. One more set of shale shaker be seated beside with 8 units of 4 inch desilter cone for 500GPM magnetic flow and shaker possesses a same function with desandershaker. The 2 sets shaker set up in one set of frame regarding fast transport when shifting jobsite.

2 sets regarding middle speed decanter centrifuge for 7 micron splitting up after desilter cyclone, the two sets of centrifuge sit down in one frame for quick when moving jobsite. Typically the bowl diameter 450 milimeter size with 1100 millimeters long with rotating velocity 1800 RPM, all revolving parts made by stainless materials SS304. The impeller with screw coated tungsten carbide for protection while hues partical will damage bolt material.

Share

written by Decanter Centrifuge \\ tags: , , , ,