Feb 16

GN Solids America LLC offer friendly unit cost on mud cleaner who is watching operation cost closely.  As the manufacture that making full line of solids control machinery and mud cleaning  system.  We provide complete solution of solids control need in various drilling operation and full after-sales service around the world as well.  We are the balance of cost effective and prompt after sale service manufacture.

Mud cleaner  is the combination of hydrocyclone in desander and desilter.  The shale shaker in the bottom for treating mud that exits on both kind of cones of the drilling fluid . This combination have the advantage of space saving and operation cost saving.

GN Shale America

Drilling fluid mud cleaner is a filtering equipment of solid control purification system. Mud cleaner is composed by inlet, outlet pipe and hydrocyclones. Hydrocyclone is made of PVC, upper cone, and under cone. The overflow line, inlet line and outlet line is fixed by the clamp. The bottom inject outlet can be adjusted and changed it according to drilling cutting in drilling fluid. When adjust the bottom flow mouth, only need screw out the adjusting spray result. Screw on the adjusting spray after changed the bottom flow sand removal exit. The both side of desander are equipped the inlet mouth, when choose the side, the other side need to cover off by blanking cover.  The heavy solid phase particles are throw to the cylinder wall by the centrifugal force, which is spiral sinking under the action of the thrust drilling fluid downward spiral and discharged from the bottom flow mouth, the flow to the screen surface.

GN Solids America LLC over 3 size of shale shaker to pair up various hydrocyclone size to meet different treating capacity need on drilling.  The model offered:  GNZJ703E-D1S8N.  GNZJ703E-2S12N. GMZJ703E-3S16N.  GNZJ594E-2S12N.  GNZJ594E-3S16N.  With combination of shale shaker and mud cleaner, it can remove solids in the mud on 20-50 microns.  We offer full lines of shale shaker screens in composite frame that will be acid resist and last longer than steel frame screen  in house to become single supply source of drilling operation.  The after sale service crews are standby for movement’s notice with full range of parts available in Houston Texas.

Share

written by Decanter Centrifuge \\ tags: , , , , ,

Sep 08

In recent years, the as the demand for environment protection is becoming more and more important, in some countries, there were even conflicts between the local residents and the oil companies or drilling companies. Companies would like to pay money on the disposal of the drilling cuttings, or, they have to face penalty even larger than the cost paid on the drilling waste management solutions.

The drilling waste management solutions for the oil and gas drilling could be divided into 2 groups: the treatment for the drilling cuttings and the treatment for the drilling fluids, the old mud.

0204-barite-recovery-centrifuge

The solution suppliers are bringing out several solutions for each group of drilling waste management, for example, in order to treat the old mud, there are several different ways, and among those, the decanter centrifuge and filter press are most prominent 2.

What they have in common?

Both of decanter centrifuge and the filter press need some chemicals to do the job, to separate out the extra fine particles from the drilling fluid.

What are the differences?

The decanter centrifuge uses the high G force generated by high speed rotating of the bowl to separate the solids from the liquid, while the filter press’ working principal is to squeeze the liquid from the solids through some filter with small holes and make the solids phase into a cake.

How are their performances?

Per their treating result, both solutions could treat out 90% solids from the liquid, especially the decanter centrifuge, the percentage is up to 95%. But when take the total cost into consideration the decanter centrifuge clearly wins out because: 1. The centrifuge uses less water than filter press. 2. Less electricity consumption. 3. Less manpower requested. That’s why 8 of ten end users are using decanter centrifuge.

 

For more equipment such as shale shaker, mud gas separator, shear pump, mud mixing system etc. and solution advise, welcome to contact GN Solids Control freely.

Share

written by Decanter Centrifuge \\ tags: , , , , ,

Sep 06

Dewatering technology is greatly use for chemical separation of the solids phase form the liquid. By using some chemicals, the fine particles of solids flocculate into larger ones and to be separated out from the liquid phase. Take the oil and gas drilling mud industry as example, there are 2 main methods to be used, the dewatering centrifuge and the filter press. Seen from their outlook and working principle, they are quite different, but which to choose and why to choose is not only based on the first look, we need a detailed calculation.

  1. Purchasing cost. The cost for buying each of them is no much different, and also comparing with future consumption, this cost seems less important.
  2. The chemicals consumed: because of the high speed and high G force of the decanter centrifuge, no much chemical is needed. But in case of filter press, more chemicals in need for fulfil the work.
  3. Water usage amount: the decanter centrifuge need to be flushed only after continuous operating and the water consumption for each time is 3-4 cbm per day, but the filter press need to be flushed all over after usage, need around 150 cbm per day. In some water scarce place, this factor has to be taken into consideration.
  4. Human force needed: it is not a heavy work to operate or observe the operation of the decanter centrifuge, so one person for one centrifuge is enough. In case when several centrifuges are at same place, even one operator can work for them all. But in case of filter press, one filter press need at least 2 persons to run it.
  5. Spare parts: the spare parts for decanter centrifuge is less than the filter press.

GN centrifuges

GN Solids Control is professional in decanter centrifuges, GN has decanter centrifuges from 9 inch bowl diameter to 22 inch bowl diameter and now GN decanter centrifuges are not only used for oil and gas industry but also for other industries. For more information, welcome to contact GN freely. GN solids control produced mud handling equipments and mud tanks are mainly used for cleaning and recycling the used driling fluids from the well bore. The mud handling equipments range including: Shale shaker, mud cleaner, desander, desilter, vacuum degasser, chemical mixing unit, Mud Gas Separator, mud agitator, bottom mud gun, shear pump, decanter centrifuge, vertical G cuttings dryer.

Share

written by Decanter Centrifuge \\ tags: , , , , , , , ,

Aug 19

As is well known in the oil and gas drillingindustry, GN Solids Control has become a more and more famous brand among the solids control manufacturers. And along with the development of the industry and the higher standard for the discharged waste, this industry is more and more depending on the drilling waste management solutions. In order to have are more efficient solution, every manufacturer is trying to provide some ideas. GN Solids Control is the one who has brought its idea into reality and such solutions are proved to be useful.

Solidification Unit

GN products range covers following fields:

  1. Oil and gas drilling solids control equipment including shale shaker, desander, desilter, mud cleaner, decanter centrifuge, mud agitator, mud guns, pumps and vacuum degasser and etc, and GN is professional for the complete system including the mud tanks.
  2. Mud recycling system for other drillings like HDD, CBM, TBM and water well drilling, for such systems, GN has both the economic configuration option with necessary treating phases an high configuration option with complete treating systems.
  3. Drilling fluids drilling waste management systems, which is used to treat the old mud, to make the old mud from the system to be suitable for further drilling again. Here GN employs some chemicals together with physical separation as dewatering unit and dewatering centrifuge.
  4. Drilling cuttings waste management systems, for water based mud, the high-G dryer and decanter centrifuge, for oil based mud ,the vertical cuttings dryer and the high speed decanter centrifuge.
  5. Final treatment for the high request treating result. In order to fulfill the higher request of treating result before discharge, GN has designed GNGH series solidification unit and TDU for final treatment of drilling cuttings.
Share

written by Decanter Centrifuge \\ tags: , , , , , ,

Jul 26

Established in 2007, GN Solids Control has grown from a local Chinese company to a big international company specialized in manufacturing solid control equipment and system. In 2014, it consecutively established subsidiaries in US and Russia to better serve the local customer and guarantee the quick delivery. Now GN solids control’s products covers from flow line control to waste management, such as the shale shaker, desander, desilter, mud cleaner, decanter centrifuge, cutting dryer, centrifugal pump, screw pump, vacuum degasser, mud gas separator, submersible pump, shear pump and so on. And GN just finished the construction of the NO.2 factory in China which specialize in manufacturing the solid control consumables- shaker screens. Now it can manufacture the screens for 5000 pieces per month with high quality and competitive prices. This will help the oil and gas industry customers a lot especially in the low oil price environment.

160629-Tandem-Shale-Shaker

Recently more and more customers get to know GN’s products and start inquiring the info about GN’s products. To better help the customers knowing GN’s product, here are some naming rules needed to understand. Now we will explain it for you gradually.

Let’s start with the shale shaker. GNZS703ED-HD, GN mean the company name, Z means the machine’s motion is linear, S means shale shaker, 703 means the shaker screen width is 700mm and the shale shaker is working with 3 screens, E means the 5th generation of the shale shaker. Since establishment, GN is always striving to improve its products and keep innovative to make all of the products line at the cutting edge of the oil and gas technology. D means the weir is lower than the regular product. This could be customized according to the customer’s requirements. HD means the position type of the possum belly, it is may be installed at back or on the top.

That’s the basic knowledge of the shale shaker’s naming rule. Hopefully it will be useful to you.We will try our best to assist your business to be successful. Welcome to visit www.gnsolidsamerica.com and please send your inquiries to USA@gnsolidscontrol.com

Share

written by Decanter Centrifuge \\ tags: , , , , , ,

Jul 26

A .The adjustment of the drum speed.

 

The adjustment of the bowl speed is performed in  manual adjustment or decanter centrifuge plate prescribed maximum working speed following the adjustment.

Different rated speed by installed different size wheel by diameter for driving the main belt wheel to set different drum operation speed

In variable frequency drive decanter centrifuge will paired with control panel that allow increase and decrease the drum speed.

By fine-tuning the speed of the drum, it can perform more precise solids particles separation.  It can also improve the wear of the drum, the vibration and the noise to extend the service life of the decanter centrifuge.

The separation purpose or drilling fluid solids content  is by the choice drum speed. For instance, barite recovery or processing high-density mud, it is suggested that the low spending  speed. For general medium density mud prefer choose medium or high speed.  The low density mud is ideal for using high speed decanting centrifuge.

decanter centrifuge-2

 

B. The adjustment of the differential drive

 

Centrifuge differential speed (back drive is also refer by) in its within the prescribed scope of, do not suggest user to adjust and it can only adjust in a small range change the parameters.

Different speed centrifuge adjustment methods are remove the original auxiliary motor pulley, and reloading large diameter or smaller diameter belt wheel  Auxiliary motor pulley  change the differential input shaft speed enhancement in result of differential speed decreased. On the other hand, it can also cause differential speed increase.

 

Operators must understand that regular maintenance on the centrifuge such as regular cleaning the inlet and outlet by filling water or diesel depends what kind of fluid it needs process.  It is also crucial that  add grease to the bearing parts to ensure proper lubrication.

GN Solids Control sell a series of solids control equipment and drilling waste management equipment including vertical cuttings dryer , shale shaker  , shear pump , oilfield shale shaker , mud cleaner , desander and desilter , vacuum degasser , Mud Gas Separator , decanter centrifuge , mud tank , mud agitator , etc . GN Solids Americal normally keep stock for GN main product and shale shaker , mud cleaner and decanter centrifuge always keep stock there to service local client .

Share

written by Decanter Centrifuge \\ tags: , , , , , ,

Jul 20

GN Solids America capability was first established in 2014 in Houston, TX. The particular facility is a multi efficient with office, assembly heart and spare parts center. Typically the facility takes about 30, 000 square feet. This office could be the first overseas subsidiary with regard to GN Solids Control and is particularly performing the function as income, after market service and also warehousing.
Now in GN Solids America warehouse, there is certainly plenty of shale shaker screen inside stock. There are many types of screen there, such as the GN individual brand GNZS series, substitution screens for MI-SWACO MONGOOSE PRO, MONGOOSE PT as well as MEERKAT, ALS, BEM; alternative screens for DERRICK FLC 2000, FLC 500, DP 600, and hyperpool; substitute screens for NOV Brandt Cobra, King Cobra, Small Cobra, Venom, LCM-2D, LCM-3D, VSM 300 series( contain scalping, primary and secondary) and replacement screen for a few other popular brand, for example Fluid System. GN Solids control can manufacture various types of screen, such as the composite shape, metal frame, soft attach strip and hard attach strip. The screen may be flat or pyramid based on customer’s requirement. The screen could be 2 layers as well as 3 layers depending on the customer’s requirement for the API variety. The screen surface are created from stainless steel, usually use SS304 or SS316. This material may make the screen more long lasting and work for longer time period. GN can manufacture often the screen from API thirty to API 400.

GN shale shaker screen
GN Solids Control’s 2nd manufacturing unit for shaker screen and decanter centrifuge will eventually be in production. It will be on the verge of produce about 5000 components of screens annually. The screen frame will be mainly blend material. GN recommends the customer to use composite body shaker screens because it may be lighter, has longer consumption life, corrosion resistant and has now larger non-blank area. Today GN screens have been purcahased by global market, we hope towards your inquiry soon.
Welcome to pay a visit to www.gnsolidsamerica.com and please send your own personal inquiries to USA@gnsolidscontrol. com

Share

written by Decanter Centrifuge \\ tags: , ,

Jul 05

Replacement screen is a big and continue cost for the drilling rig operations. As a China leading manufacturer and a worldwide famous brand for mud solids control, drilling waste management, as well as replacement shaker screen, GN Solids Control knowswell that clients need very good quality replacementscreens with competitive price.GN men keep improving its screen quality and the processing technology in order to offer clients with higher quality screen with better price.

GN Solids Control opened his first new facility in Beijing in year 2012. And this year, GN Solids Control set up his second new facility in Beijing. Once the new facility is ready, GN Solids Control can make composite material replacement screen there, in including but not limited to below:

  • Composite material Replacement screen for the whole line of GN linear motion shale shaker: GNZS752 2-panel shale shaker, shaker, GNZS703 3-panel shale shaker, GNZS594 4-panel shale shaker,GNZS753 double deck shale shaker and GNZS706 double deck shale.
  • Swaco Mongoose composite replacement screen
  • VSM 300 composite replacementscreen
  • NOV Brandt King Cobra Composite Screen(Thickness:26mm without rubber, not big thickness)
  • Fluids System (FSI) Composite replacement screen
  • Furthermore, as GN hot sale products, GN Solids improved the manufacturing technology of the hook type replacement screen for Derrick 500 shaker and for Derrick 2000 shaker.

GN shale shaker screen

And GN Solids Control can customize any mold for frame screens if there is a market for that.

In order to support clients more, GN Solids Control can offer customized packages for the screens. They can make screen with clients color, company name and logo,

For clients with reliable requirement for shaker screen, GN Solids Control welcomethey pay visits to GN Solids Control head quarter in Beijing to have a visit of GN 2 facilities. They will know GN quality and products such as shear pump, mud cleaner , decanter centrifuge, mud mixing  system .etc. well. And they can talked with GN engineering team for a better and customized service to them.

Share

written by Decanter Centrifuge \\ tags: , , , , , ,

Jun 28

GN Solids Control is really a world famous solids control maker and drilling waste management turnkey provider.
This year GN Solids Control will sign up for many top oil and gas display. GN Solids Russia may attend the MIOGE 2016, which is one of the largest vitality shows in Russia along with Europe. Another branch firm GN Solids America may also attend the great OTC demonstrate.
This year the MIOGE is actually hold at EXPOCENTER within Moscow, Russia from Rate of interest. 18th to 21st. GN Solids Russia booth number is Pavilion-2, Hall-5, T 40.
Welcome to connect with GN Solids Russia for more info, GN Solids will give hot here you are at all GN old along with new friends in this demonstrate. GN Solids Russia is found at Г. Москва, Радонежского Сергия Ул. д. a couple of, please feel free to call +7-8(925)304 25 70 +7- 8(968)950 31 49 and make the reservation.
GN Solids Russian federation will exhibit the following tools:
1 . GN Mud Cleaner
GNJZ594E-3S16N will be exhibited with this show. This one compact solids control equipment with a few sets desanders and fourth there’s 16 sets desilters on the top of a single GN shaker. This GN shaker is using the same dimensions of Mongoose screens. GN also manufactures various shaker screens, such as replacement projection screens for Derrick, NOV, FSI etc .

Russia Oil Show
2 . GN Decanter Centrifuge
GNLW363 centrifuge is really a proven successful equipment that may be used to separate mud and also recovery barite. With Tungsten carbide tiles along the attach propellers and ceramics plug-ins, GN decanter centrifuge is far more resistance and can be used for a longer period.
3. GN Cuttings Dryer
GNCD930 cuttings dryer is especially used for OBM, SBM or even WBM separation. With these many years feedback from worksites, GN cuttings dryer has been replacing to separate all the cuttings via shale shaker, desilter.
GN Solids America LLC also has a couple booths in this year from the OTC show, one is from the NRG Center (booth number 1652-A) for GN Solids Control and another with the area for GN Solids America (booth no . 9732).

Share

written by Decanter Centrifuge \\ tags: , , , , ,

Jun 21

“GE, an industrial company, but also a digital company”. Some people may have watched this commercial on American’s main media, like CNN or NBC and we may wonder what does that mean? The answer is it represents the future trend-digital and automation.

As we all know, GE is the conglomerate in many industries, such as energy, electric appliances, aerospace and so on. So its action and strategy will represent the future of the industry. Recently GE just opened its new main office nearly San Jose and recruited a lot of engineers from Google, Apple, Microsoft with background of electrical engineer to develop its own system  called “Predix”, which is the world’s first and only cloud-based operating system for industry. GE plans to make “Preix” as the industry standard similar to the position of Microsoft Windows system in the PC industry. It will realize the digitalization and automation of the industry, including the oil and gas industry. One example for this trend is on June 14,2016, GE and Technip signed memorandum of understanding to explore digital solutions for new LNG projects. LNG will have great potential for growth as the world’s demand rises. So this prosperous area will be co-developed by the combination of strength of GE and Technip. GE will provide it reliable equipment solutions for the global LNG facilities, through sensors, advanced analytics and diagnostic expertise. Technip will provide unique expertise in EPC for LNG projects.

gn-solids-america-about

The future of the oil and gas industry will be more efficient and powerful, which will be realized by digital and automation and will optimize the equipment and operation to improve the productivity and cost-efficiencies.

As the crucial part of the mud cleaning system of the oil and gas industry, solid control system will also inevitably follow the trend of automation and digital, including its shale shaker, desander, desilter, mud cleaner, decanter centrifuge, mud agitator, cuttings dryer  and some other equipment and parts. GN solids control can manufacture the most advanced solid control equipment in the industry, such as the VFD controlled equipment which can realize the automation and digital. Welcome to log in to our website www.gnsolidsamerica.comto check more about the product info and send your inquiries to usa@gnsolidscontrol.com.

 

Share

written by Decanter Centrifuge \\ tags: , , , , , ,