Feb 16

GN Solids America LLC offer friendly unit cost on mud cleaner who is watching operation cost closely.  As the manufacture that making full line of solids control machinery and mud cleaning  system.  We provide complete solution of solids control need in various drilling operation and full after-sales service around the world as well.  We are the balance of cost effective and prompt after sale service manufacture.

Mud cleaner  is the combination of hydrocyclone in desander and desilter.  The shale shaker in the bottom for treating mud that exits on both kind of cones of the drilling fluid . This combination have the advantage of space saving and operation cost saving.

GN Shale America

Drilling fluid mud cleaner is a filtering equipment of solid control purification system. Mud cleaner is composed by inlet, outlet pipe and hydrocyclones. Hydrocyclone is made of PVC, upper cone, and under cone. The overflow line, inlet line and outlet line is fixed by the clamp. The bottom inject outlet can be adjusted and changed it according to drilling cutting in drilling fluid. When adjust the bottom flow mouth, only need screw out the adjusting spray result. Screw on the adjusting spray after changed the bottom flow sand removal exit. The both side of desander are equipped the inlet mouth, when choose the side, the other side need to cover off by blanking cover.  The heavy solid phase particles are throw to the cylinder wall by the centrifugal force, which is spiral sinking under the action of the thrust drilling fluid downward spiral and discharged from the bottom flow mouth, the flow to the screen surface.

GN Solids America LLC over 3 size of shale shaker to pair up various hydrocyclone size to meet different treating capacity need on drilling.  The model offered:  GNZJ703E-D1S8N.  GNZJ703E-2S12N. GMZJ703E-3S16N.  GNZJ594E-2S12N.  GNZJ594E-3S16N.  With combination of shale shaker and mud cleaner, it can remove solids in the mud on 20-50 microns.  We offer full lines of shale shaker screens in composite frame that will be acid resist and last longer than steel frame screen  in house to become single supply source of drilling operation.  The after sale service crews are standby for movement’s notice with full range of parts available in Houston Texas.

Share

written by Decanter Centrifuge \\ tags: , , , , ,

Aug 11

Mud plant is very important application in solids control industry for oil and gas drilling industry. It is used to further treat and to storage the drilling mud back from the solids control system of rig site and get the drilling mud to be ready for next time use.

drilling mud system

What equipment is used for a mud plant?

Normally, the mud plants’ main application is for storage the drilling mud, and adding some necessary chemicals into the mud. So the commonly used equipment is:

  1. Mud agitators. Where there’s mud, there’s agitator. Because if the mud is still for a while, the heavy components in the mud would settle down to the bottom and as long as they settle down, it is difficult or even impossible to re-stir them. So mud agitator is a continuously working equipment in a mud plant. GNJBQ series mud agitators covers all necessary models for oil and gas use mud agitators, it is compact in structure and with a powerful strength. Based on your tank depth, GN could recommend you with suitable model of mud agitator.
  2. Mud guns. Normally, the mud gun and mud agitator are used in pairs, like besides each mud agitator, there’s a mud gun. As the mud agitator is working in the middle of the tank, the mud gun is used to stir the mud in the tank corner. GN mud gun is suitable for high pressure up to 6.4 Mpa, and there are fixed nozzle models and rotary nozzle models for option. In addition to the main application as stirring the drilling mud at tank corner, the mud gun could also be used for transporting the mud from one tank to another.
  3. Jet mixing system. It is combined by a jet mixing hopper and a feeding pump for the hopper. For making the old mud to be suitable for future use, we need to add some chemicals into the mud. GNSLS series hoppers are made of stainless steel, with same or even better material than USA brands and with a longer service life. GNSB series centrifugal pumps are interchangeable with MISSION pump with spare parts. It could be used as feeding pump for hopper and desander or desilter’s feeding pump.
Share

written by Decanter Centrifuge \\ tags: , , , ,

Aug 02

Chinese leading solids control machinery manufacture GN Solids America LLC,   strategic located outside of Beijing for fast shipping around the world, we manufacture full line of solids control machinery and drilling waste management equipment , jet mud mixer is one of the products we manufacture our self and offer to various type of drilling project. GNSL series jet mud mixer is the machinery to prepare and increase the drilling fluids weight by adding and mixing  betonies, change the fluid density, change the mud density, viscosity, and dehydration. The effect is more prominent matching with Shear Pump. GNSL jet mud mixer is a unit used together with the drilling mud system for petroleum drilling and horizontal directional drilling (HDD).

Jet mud mixer’s purpose is to increase and the configuration of the drilling fluid machinery, the main function of the jet mud mixer is to change the drilling fluid density, viscosity and water loss.

GN Jet mud mixer 2016

The equipment with more obvious effect with combination of the shear pump because the betonies powder, chemical treatment agent, barite is equal to the water into the drilling fluid formulated with particular spec or add some additives in drilling fluid has to change its properties.

Jet mud mixer has long proven record of usage in solids control operation.  Drilling mud will change its character by overly use and clean and it needs device like Jet mud mixer to restore the ideal mud condition by adding chemicals and additives to the mud and keep the ideal mud condition.

Jet mud mixer and oil drilling mud system supporting the use of the equipment, the utility model has the advantages of safety and reliability, convenient movement and transportation.  Jet mud mixer has a pump can also be multiple-use and one jet mixing hopper (or multiple) with a pipe valve connection installed on a base composition.

Share

written by Decanter Centrifuge \\ tags: , , ,

Jul 26

Established in 2007, GN Solids Control has grown from a local Chinese company to a big international company specialized in manufacturing solid control equipment and system. In 2014, it consecutively established subsidiaries in US and Russia to better serve the local customer and guarantee the quick delivery. Now GN solids control’s products covers from flow line control to waste management, such as the shale shaker, desander, desilter, mud cleaner, decanter centrifuge, cutting dryer, centrifugal pump, screw pump, vacuum degasser, mud gas separator, submersible pump, shear pump and so on. And GN just finished the construction of the NO.2 factory in China which specialize in manufacturing the solid control consumables- shaker screens. Now it can manufacture the screens for 5000 pieces per month with high quality and competitive prices. This will help the oil and gas industry customers a lot especially in the low oil price environment.

160629-Tandem-Shale-Shaker

Recently more and more customers get to know GN’s products and start inquiring the info about GN’s products. To better help the customers knowing GN’s product, here are some naming rules needed to understand. Now we will explain it for you gradually.

Let’s start with the shale shaker. GNZS703ED-HD, GN mean the company name, Z means the machine’s motion is linear, S means shale shaker, 703 means the shaker screen width is 700mm and the shale shaker is working with 3 screens, E means the 5th generation of the shale shaker. Since establishment, GN is always striving to improve its products and keep innovative to make all of the products line at the cutting edge of the oil and gas technology. D means the weir is lower than the regular product. This could be customized according to the customer’s requirements. HD means the position type of the possum belly, it is may be installed at back or on the top.

That’s the basic knowledge of the shale shaker’s naming rule. Hopefully it will be useful to you.We will try our best to assist your business to be successful. Welcome to visit www.gnsolidsamerica.com and please send your inquiries to USA@gnsolidscontrol.com

Share

written by Decanter Centrifuge \\ tags: , , , , , ,

Jul 05

Replacement screen is a big and continue cost for the drilling rig operations. As a China leading manufacturer and a worldwide famous brand for mud solids control, drilling waste management, as well as replacement shaker screen, GN Solids Control knowswell that clients need very good quality replacementscreens with competitive price.GN men keep improving its screen quality and the processing technology in order to offer clients with higher quality screen with better price.

GN Solids Control opened his first new facility in Beijing in year 2012. And this year, GN Solids Control set up his second new facility in Beijing. Once the new facility is ready, GN Solids Control can make composite material replacement screen there, in including but not limited to below:

  • Composite material Replacement screen for the whole line of GN linear motion shale shaker: GNZS752 2-panel shale shaker, shaker, GNZS703 3-panel shale shaker, GNZS594 4-panel shale shaker,GNZS753 double deck shale shaker and GNZS706 double deck shale.
  • Swaco Mongoose composite replacement screen
  • VSM 300 composite replacementscreen
  • NOV Brandt King Cobra Composite Screen(Thickness:26mm without rubber, not big thickness)
  • Fluids System (FSI) Composite replacement screen
  • Furthermore, as GN hot sale products, GN Solids improved the manufacturing technology of the hook type replacement screen for Derrick 500 shaker and for Derrick 2000 shaker.

GN shale shaker screen

And GN Solids Control can customize any mold for frame screens if there is a market for that.

In order to support clients more, GN Solids Control can offer customized packages for the screens. They can make screen with clients color, company name and logo,

For clients with reliable requirement for shaker screen, GN Solids Control welcomethey pay visits to GN Solids Control head quarter in Beijing to have a visit of GN 2 facilities. They will know GN quality and products such as shear pump, mud cleaner , decanter centrifuge, mud mixing  system .etc. well. And they can talked with GN engineering team for a better and customized service to them.

Share

written by Decanter Centrifuge \\ tags: , , , , , ,

Jun 13

Days and nights ago, GN Solids Control cooperated with an outdoor workforce and held an activity with suburb Beijing for a at some point journey. GN sales team gone to this journey and the quest was fruitful and substantial.
Marketing department is a very essential department of GN firm, this department is put together by more than twenty childhood who have a same objective and dream. This division includes three teams, the actual domestic sales team, the oversea market sales team and the marketing and advertising team, their duty isn’t only to get orders for the corporation, but also to collect information on the industry, receive feedbacks along with tips from clients and in addition takes some responsibility for that after sale service to the clients. Most of their period is spent on work.
Yet work shouldn’t be the just content of their life, and also work is also fun. GN Solids Control’s products are released to more than 60 nations and regions in the world, as well as for every time zone, there are GN’s clients. GN solids control has department offices and companies with USA and Russia and also GN agents are in a lot of countries. So GN income are working per different timezones and always on business holiday out of the country or from the city. It is not easy to get a re-union for everyone. GN can provide mud mixing system , mud cleaner, shale shaker , decanter centrifuge, mud agitator, mud tank ,shear pump, shaker screens ,etc.
This time, when we acquired this journey, there are still seven members are absent. GN team sent greetings photos to them to share the joy.

160526-GN-Outdoor-Training-1
With this journey, there are several activities assemble, it is not only test and contend for everyone’s IQ and also EQ, but also, a challenge with regard to everyone’s courage and staff work attitude. All challenges required a good team perform and cooperation. When we are only, we can not finish some of them, even without thinking of it. Nevertheless we work together, we confront the same problem and we provide for the solution, we accomplished all of them.
It’s just like the daily do the job, when we get together and discuss our ideas and experience, it would be easier for us for the most powerful solution and make the full using our resources. Only this way, could our team be more robust and tougher.
Well done, and we’ll do better.

Share

written by Decanter Centrifuge \\ tags: , , , , , ,

Jun 07

New environmental regulations are more focusing on the final disposal of drilling waste cutting. Normally there are several methods for final treatment of the drilling waste management . Cuttings Re-injection is also one of the main methods. In many developed countries like USA, Canada and Germany, cuttings re-injection technology is already very mature. China drillers are now more and more adopting this technology for final treatment on drilling cuttings.

Cuttings Re-injection system is always including 3 parts as cuttings transferring, cuttings screening and Cuttings Re-injection. In the first stage for cuttings transferring, there are shale shakers, centrifuge and other traditional solids control equipment doing the same job for drilling fluids recycling. The cuttings discharged from the shale shaker will be collected by the screw conveyor and then transferred to a Venturi device to fast transferring to the storage tank. Here the centrifugal pump will be equipped for shearing the cuttings. In mud mixing system, a fine mesh screen shaker will be here for screening the cuttings suitable for re-injection to underground. The injection pump is triplex cylinder type with pressure around 40MPa. With cuttings fed by the centrifugal pump, the injection pump would pump the cuttings back to the underground via the well.

160520ContainerCuttingsDryer

The well for re-injection could be either a new drilled one or an old well. Always a new one would be better to avoid the cuttings leak into the oil production layer. The re-injection layer could be under or above the production layer. This technology requests accurately analysis on the geological condition as not everywhere could be chosen as a point for cuttings re-injection.

Driller need choose the cuttings disposal method according to specific condition. Cuttings re-injection is a very good method for offshore drilling cuttings disposal, as it will save much time on shipping the cuttings back to onshore plant for treatment. Especially the application of SBM makes the base liquid is biodegradable for better environmental protection.

Share

written by Decanter Centrifuge \\ tags: , , , ,

May 17

If you would like to meet GN solids control at acrylic exhibition in 2016, this is contact sales@gnsolidscontrol. com for the appointment.
For Japan, Middle east and other nations around China, pls stop by at CIPPE 2016 throughout Beijing, China during Mar 29~31th. We will show the is among the most solids control equipments as well as drilling waste management gadgets as below:
Cuttings grasp dryer with telescopic skid
Drilling waste decanter centrifuge with telescopic skid
Gold mining centrifuge
Hi-G dryer shaker
Cuttings solidification unit
Solids control shale shaker
Solids control mud cleaner
Shaker screens
Dewatering unit
We now have a 272m2 booth on E2 hall, because our manufacturer is quite closed to the exhibit center, only 50 minuted drive by car, and we take all of our main tools there to show.

IMG_5263 If you are pretty busy in March, this is visit us at SIPPE 2016 in Shanghai this December.
If China is too not even close to your countries, like the clents from South America, Northern America, Middle east, The african continent, welcome to visit us at OVER-THE-COUNTER 2016 in Houston, ARIZONA at the beginning of May. We have a couple of stands there,
GN Sales space No . 1: Reliant Facility 1652-A
GN Booth Number 2: Reliant Arena 9732
Our professional sales engineer will highlight the unique technology of our straight cuttings dryer and VFD decanter centrifuge, and four -panel shale shaker.
A result of the low oil price in addition to slow oil industry, a number of clients cancelled the global oil show visit program, and will mainly focus on the particular professional oil show of their own country. You can satisfy GN at the specific event below:
(1) In India:
(2) In Iran
(3) In Russia
(4) In Malaysia
(5) In singapore:
(6) In Canada
(7) In Abu Dhabi
If you are convenient to meet you for any of the exhibitions earlier mentioned, pls contact us freely.

Share

written by Decanter Centrifuge \\ tags: , , ,

Mar 31

Recycle the drilling mud that lubricate the drilling bits.

The drilling mud solids control system is for filter away danger solids phase that contain in the drilling mud and reuse the needed solid phase.  The task is to keep drilling fluids in stable performance status.  There are several machinery that will need to perform the tasks.

The result of consist performance of drilling mud is avoid the blocking and damage of the oil and gas channel. It reduce the well drilling torque and friction drag and reduce the pressure oscillation of the annular air suction.  It also increase the velocity of the well drilling, extend life of the drill bit, reduce wear of the equipment.

drilling mud system

There are  five steps of filtering process that require five solids control machinery that will do  filter screening, degassing the mud, desanding the mud, desilting the mud, centrifuge force separation and demand of weighting up mud. The consist work flow between every solids control equipment use in the whole system is very important.   Level one to five level of output of the mud should be matched each other and the interval of separation size should be appropriate and have a certain overlap.  The result of the smaller solids which are not filter by the upper can be filter in the next controlled level.

With the development of well drilling technology, mud mixing system plays an important role in drilling operation. The various kinds of solids control systems function at the same time. Regardless the different kind of the solids control system, it’s basic function will not changed. It is depend on organic combination of mechanical removal equipments, drilling fluid mud tanks and other auxiliary equipments to accomplish the basic function:  Recycle the drilling mud that lubricate the drilling bits

Share

written by Decanter Centrifuge \\ tags: , , , , ,

Mar 23

Hebei GN Solids control company LLC is actually China leading manufacturer with regard to drilling mud solids control equipment and drilling waste management gear. Its brand name is GN Solids Control.
GN Solids control offers one quit solution for drilling device fluids, from mud solids control until the drilling waste management treatment system.
Since the first API certified solids control manufacturer from China, GN Solids Control aims upon China top market and also the international market. 70% associated with GN Solids Sales is actually from international market. GN Solids Control keep enhancing to cater for the higher as well as higher request of the worldwide market clients. With its quick development, GN Solids Control is among the leading solids control mafanucturers from all over the world as well as establish a famous brand: GN Solids Control.

new website
In order to offer a much more efficiency services to customers, GN Solids Control upgraded the company website, to offer a much better visual effect website. It can match for the mobile reading gear.
The new website of GN Solids Control is much more legible. And the new menus may hopes the visitors to discover the suitable equipment and information much more fast.
Further more, GN Solids Control upgrade its logo. All equipment documents as well as new equipment will start to make use of the new logos from now on.
Beneath is some of the advantages of GN Solids Control
1) GN is the First API licensed solids control equipment producer coming from China.
2) GN Solids America LLC is the first UNITED STATES based solids control organization from China.
3) No . one in China for immediate exporting of mud solids control and drilling waste materials management equipment. GN Services happen to be exported to over 60 nations and regions, with spouses and branches in UNITED STATES, Australia, Latin America, Center East, Africa etc .
4) GN Owns over ten patents for solids control and drilling waste management equipment.
GN offers one-stop and turn-key solution with regard to solids control and going waste management.
GN maintains research and develop the very best technology to manufacture high quality Shale shaker, mud cleaner, desander, desilter, vacuum degasser , mud mixing system ,mud tank system, mud agitator, bottom mud gun, shear pump , decanter centrifuge, vertical G cuttings dryer for our clients.

Share

written by Decanter Centrifuge \\ tags: , , , , , ,