Nov 30

GN Solids Control is one of the largest solid control and waste management companies which specializes in manufacturing the related equipment, such as shale shaker, desander, desilter, mud cleaner, vacuum degasser, mud gas separator, decanter centrifuge, agitator, centrifugal pump, cutting dryer, screw pump, shear pump, mud gun and so on. After 10 years development, GN has promoted its products to over 60 countries and now it also established two overseas subsidiaries, US and Russia.

Dilution is used to control the solids content of the drilling fluid prior to introduction of the mechanical solids removal equipment. A typical dilution procedure requires dumping a portion of the active drilling fluid volume into a waste pit and then diluting the solids concentration in the remaining fluid by adding a suitable base liquid such as water or synthetic oil. For more than 60 years, the use of solid state control equipment to minimize dilution has become standard practice in the drilling industry. The equipment and methods changed during that time, but the basic principles behind the process are not yet:

Solid Concentration Substance – Increasing solids content is detrimental to fluid performance.

Economic issues – Mechanical removal of solids costs less than dilution.

Quantity is important – the amount of waste produced represents performance.

Size is important – tiny solids are the most harmful and difficult to remove.

Stokes’s law is important – viscosity and density affect gravity separation.

Shaker Selection – The shaker screen is uniquely separated according to size.

Footprints are important – the available space for rig equipment is always limited.

GN Solids America can be your one stop shop for all your solids control equipment needs. Hopefully it will be useful to you. We will try our best to assist your business to be successful. Welcome to visit www.gnsolidsamerica.com and please send your inquiries to USA@gnsolidscontrol.com

gn-solids-america-about

Share

Related posts:

  1. The Decanter Centrifuge Made by GN Solids Control Company
  2. GN Jet Mud Mixer of Solids Control System
  3. GN Solids America LLC’s jet mud mixer’s place in solids control system
  4. GN Centrifugal Pump for Solids Control System
  5. Mud solids control system is for…

written by Decanter Centrifuge


Leave a Reply